Skip to content

Free shipping on orders over $99.

8:30 to 5 ET(704) 555-0142
Not sure what you have? Send the part number(704) 555-0142
Apollo Apollo ORB-OP-12001-APO Orbis Optical Smoke Detector view 1

Apollo ORB-OP-12001-APO Orbis Optical Smoke Detector

Apollo
$2.45
In stock — 30 available
In stock · ready to ship
Ships today — order before 3:00 PM ET
Delivery in 3–5 business days
Ships from the USA — free shipping over $99
BrandApollo
SKUORB-OP-12001-APO
TypeSmoke Detectors
Variants1

Apollo ORB-OP-12001-APO is the Orbis Optical Smoke Detector, a conventional two-wire detector head from Apollo Fire Detectors. It works on the light-scatter principle, and its chamber measures back-scattered as well as forward-scattered light, which Apollo says improves its response to black smoke. Apollo recommends it as a general-purpose smoke detector for early warning in most areas, and notes optical detectors suit smouldering fires and escape routes.

Specifications

Detection principle Photo-electric detection of light scattered by smoke particles
Sampling Once every four seconds
Operating voltage 8.5 to 33 V DC, two-wire supply, polarity sensitive
Average quiescent current 95 µA at 24 V
Alarm current 20 mA at 12 V; 40 mA at 24 V
Alarm load 600 Ω
Holding voltage / current 5 to 33 V; 8 mA minimum holding current
Alarm reset Below 1 V; reset time one second
Power-up time Less than 20 seconds
Alarm indicator Integral, 360° visibility
Remote LED output 1.2 kΩ connected to negative supply
Operating and storage temperature -40 °C to +70 °C (-40 °F to 158 °F)
Humidity 0% to 98% RH, no condensation or icing
Dimensions 97 mm diameter x 31 mm high (3.82 in x 1.22 in)
Weight 75 g
Housing White flame-retardant polycarbonate; tin-plated stainless steel terminals
Approvals for this part number CPR, LPCB, VdS, BOSEC, SBSC, FG (EN 54-7 standard listed)

Compatibility and installation notes

  • Detector head only; it fits an Orbis base. Apollo's head installation guide covers fitting heads to Orbis TimeSaver bases, including the optional head locking feature.
  • StartUp check: with correct polarity, the red LED flashes once per second for four minutes after power-up; a smoke or heat test can be done during that window.
  • A locked head is released with a 1.5 mm hexagonal driver (Apollo part 29600-095) through the small hole in the detector face.
  • FasTest runs a functional test in four seconds; the yellow DirtAlert LED flags a detector that has reached its drift-compensation limit.
  • The approvals Apollo lists for this part are European marks; no UL or ULC certification is stated in the documents used here.

Related models

  • ORB-OP-12003-APO: same detector with a red LED that flashes in normal operation

Documents

Specifications from Apollo data sheet PP2632/2019/Issue 1 (Orbis Optical Smoke Detector) and Orbis Detector Head Installation Guide 39214-211 Issue 2. Manufacturer specifications are subject to change.

Questions about this product

Is Apollo ORB-OP-12001-APO Orbis Optical Smoke Detector in stock?

Yes — 30 units are available and ready to ship from our US warehouse.

How fast will Apollo ORB-OP-12001-APO Orbis Optical Smoke Detector ship?

Orders placed before 3:00 PM ET ship the same business day. Delivery takes 3–5 business days inside the USA.

Where does Apollo ORB-OP-12001-APO Orbis Optical Smoke Detector ship from?

It ships from the United States. Standard delivery is 3–5 business days, and orders placed before 3:00 PM ET go out the same day.

Cart0
Your cart is empty

Have an account? Log in to check out faster.

Continue shopping