Skip to content

Free shipping on orders over $99.

8:30 to 5 ET(704) 555-0142
Not sure what you have? Send the part number(704) 555-0142
Det-Tronics Det-Tronics X5200GA4N13SE1 (013252-001) UV/IR Flame Detector view 1

Det-Tronics X5200GA4N13SE1 (013252-001) UV/IR Flame Detector

Det-Tronics
$636.27
In stock — 47 available
In stock · ready to ship
Ships today — order before 3:00 PM ET
Delivery in 3–5 business days
Ships from the USA — free shipping over $99
BrandDet-Tronics
SKU013252-001
TypeFlame Detectors
Variants1

The Det-Tronics X5200GA4N13SE1 (part 013252-001) is an X5200G UV/IR flame detector with a Kr85-free source tube. Its UV and IR sensors watch the same hazard through a 90 degree cone of vision, and an alarm is generated only when both sensors detect a flame at the same time, giving high immunity to false alarms.

The model code defines this version: aluminum housing (A), four 3/4 in. NPT conduit entries (4N), relay and 0-20 mA outputs (13), SIL and ATEX/IECEx approvals (SE) and a Division/Zone Ex d e classification (1).

Specifications

Detection Ultraviolet / infrared (UV/IR)
Cone of vision 90 degrees
Operating voltage 24 VDC nominal (18 to 30 VDC)
Power consumption 2.8 W at 24 VDC without heater; 4.8 W in alarm; heater up to 8 W
Relays Fire alarm (Form C), fault (Form A) and auxiliary (Form C), 5 A at 30 VDC
Current output 0 to 20 mA (±0.3 mA)
Operating temperature -40 to +167°F (-40 to +75°C)
Humidity 0 to 95% RH
Housing Copper-free aluminum, 4 x 3/4 in. NPT
Power-up Ready to signal an alarm 30 seconds after power-up

Installation notes

  • A Q9033 mounting arm is used to mount the detector; see manual 95-8686
  • At least 18 VDC must be present at the detector; shielded cable is required
  • Fill all conduit entries with certified hazardous location metallic cable glands or stop plugs
  • Arc rejection processing is recommended for most applications; standard processing is for high-speed suppression only

Related models

The X5200 family also includes the standard X5200 and molybdenum-tube X5200M and X5200GM versions, with other output and approval codes.

Documents

FAQ

What does the model code X5200GA4N13SE1 mean?
X5200G = UV/IR detector with Kr85-free source tube, A = aluminum, 4N = four 3/4 in. NPT ports, 13 = relay and 0-20 mA outputs, SE = SIL and ATEX/IECEx approvals, 1 = Division/Zone Ex d e.

How does it avoid false alarms?
Both the UV and IR sensors must detect a flame at the same time before an alarm is generated, and arc rejection processing ignores the short UV signatures of most false alarm sources.

What power does it need?
24 VDC nominal, 18 VDC minimum and 30 VDC maximum. It draws 2.8 W at 24 VDC without the heater; the heater adds up to 8 W.

What is its temperature range?
-40 to +167°F (-40 to +75°C) operating.

Questions about this product

Is Det-Tronics X5200GA4N13SE1 (013252-001) UV/IR Flame Detector in stock?

Yes — 47 units are available and ready to ship from our US warehouse.

How fast will Det-Tronics X5200GA4N13SE1 (013252-001) UV/IR Flame Detector ship?

Orders placed before 3:00 PM ET ship the same business day. Delivery takes 3–5 business days inside the USA.

Where does Det-Tronics X5200GA4N13SE1 (013252-001) UV/IR Flame Detector ship from?

It ships from the United States. Standard delivery is 3–5 business days, and orders placed before 3:00 PM ET go out the same day.

Cart0
Your cart is empty

Have an account? Log in to check out faster.

Continue shopping