Skip to content

Free shipping on orders over $99.

8:30 to 5 ET(704) 555-0142
Not sure what you have? Send the part number(704) 555-0142
Det-Tronics Det-Tronics X3301A4N11T1 (028234-001) Multispectrum Infrared Flame Detector view 1

Det-Tronics X3301A4N11T1 (028234-001) Multispectrum Infrared Flame Detector

Det-Tronics
$779.64
In stock — 37 available
In stock · ready to ship
Ships today — order before 3:00 PM ET
Delivery in 3–5 business days
Ships from the USA — free shipping over $99
BrandDet-Tronics
SKU028234-001
TypeFlame Detectors
Variants1

Det-Tronics X3301A4N11T1 (028234-001) is an X3301 multispectrum infrared flame detector in a copper-free aluminum housing with four 3/4 in. NPT conduit entries and relay outputs (fire alarm, auxiliary and fault, with RS-485 Modbus). It carries the T approval set (SIL/FM/CSA/ATEX/IECEx/ULC/VdS) and the Ex d e Division/Zone classification. The -001 suffix is the factory software configuration: medium sensitivity with non-latching relays.

Specifications

Model / part number X3301A4N11T1 / 028234-001
Material Aluminum (A), copper-free, painted
Conduit entries 4 ports, 3/4 in. NPT (4N)
Output Relay (11)
Approvals SIL/FM/CSA/ATEX/IECEx/ULC/VdS (T)
Classification Division/Zone Ex d e (1)
Software configuration (-001) Medium sensitivity; alarm relay de-energized, auxiliary and fault relays energized; all non-latching
Relay contacts 5 A at 30 Vdc; fire alarm Form C, fault Form A, auxiliary Form C
Operating voltage 24 Vdc nominal (18 to 30 Vdc), 2 V p-p maximum ripple
Power consumption 4 W minimum without heater; 17 W at 30 Vdc with EOL resistor and heater at maximum
Field of view 90° horizontal by 75° vertical, at a minimum of 70% of on-axis distance
Medium sensitivity response n-heptane 1 x 1 ft at 100 ft (30.5 m), 7 s average; methane 32 in. plume at 70 ft (21.3 m), 6 s average
Spectral range 4 to 5 microns
Operating temperature -40 to +167 F (-40 to +75 C)
Ship weight 7 lb (3.2 kg)
Warranty 5 years

Compatibility and installation notes

  • A Q9033 mounting arm is required: Q9033A (aluminum detectors only) or Q9033B (aluminum and stainless steel).
  • Automatic oi checks each sensor's ability to detect fire; magnetic and manual oi tests are available, so no test lamp is required.
  • Aim the detector downward at least 10 to 20 degrees; 16 AWG (2.5 mm2) shielded cable is recommended.
  • The 125 ft (38.1 m) methane range quoted for the X3301 applies to the very high sensitivity setting, not to this -001 configuration.

Related models

Documents

Specifications from Det-Tronics specification data 90-1218 rev. 2.2 (08/20), X3301 instruction manual 95-8704 rev. 5.1 (08/2021) and the 2026 Det-Tronics Product Catalog 52-1002-26.0. Manufacturer specifications are subject to change.

Questions about this product

Is Det-Tronics X3301A4N11T1 (028234-001) Multispectrum Infrared Flame Detector in stock?

Yes — 37 units are available and ready to ship from our US warehouse.

How fast will Det-Tronics X3301A4N11T1 (028234-001) Multispectrum Infrared Flame Detector ship?

Orders placed before 3:00 PM ET ship the same business day. Delivery takes 3–5 business days inside the USA.

Where does Det-Tronics X3301A4N11T1 (028234-001) Multispectrum Infrared Flame Detector ship from?

It ships from the United States. Standard delivery is 3–5 business days, and orders placed before 3:00 PM ET go out the same day.

Cart0
Your cart is empty

Have an account? Log in to check out faster.

Continue shopping