Skip to content

Free shipping on orders over $99.

8:30 to 5 ET(704) 555-0142
Not sure what you have? Send the part number(704) 555-0142
Eaton Wheelock Eaton Wheelock SSB-4 Tile Bridge, 4" Speaker Support view 1

Eaton Wheelock SSB-4 Tile Bridge, 4" Speaker Support

Eaton Wheelock
$1.94
In stock — 31 available
In stock · ready to ship
Ships today — order before 3:00 PM ET
Delivery in 3–5 business days
Ships from the USA — free shipping over $99
BrandEaton Wheelock
SKUSSB-4
TypeSpeakers
Variants1

Eaton Wheelock SSB-4 is a steel speaker support bridge for mounting Wheelock 4-inch ceiling speaker assemblies into acoustic tile ceilings with tiles up to 24 in. wide. The bridge spans the ceiling grid and carries the back box, with provisions for four #8-32 J-nuts and seismic tabs for secondary support tie-off in six places.

It is used with Wheelock CH70, CH90, E70, ET70, E90, ET90 and ET-1080 series speakers and speaker strobes, and with Eluxa ceiling models including the ELFHNC, ELFHSC, ELHNC, ELHSC, ELSPKC, ELSPSTC and ELSTC.

Specifications

Type Ceiling support bridge for 4-inch speakers
Order code 3380
Material Steel
Ceiling tiles Acoustic tile, up to 24 in. wide
Hardware Provisions for (4) #8-32 J-nuts
Secondary support Seismic tabs for tie-off, 6 places

Installation notes

  • ET Series flush ceiling mount: use a 4 in. square x 2-1/8 in. deep box with a 1-1/2 in. extension ring
  • All other Wheelock 4-inch flush ceiling speakers: use a 4 in. square x 1-1/2 in. deep box with a 1-1/2 in. extension ring
  • Not intended for use in hazardous locations as defined by the NEC and NFPA

Related models

  • SSB-8: 8-inch ceiling support bridge
  • CBB-8: 8-inch ceiling speaker back box

FAQ

Which speakers does the SSB-4 support?
Wheelock 4-inch ceiling speaker assemblies, including the CH70, CH90, E70, ET70, E90, ET90 and ET-1080 series and Eluxa ceiling models such as the ELSPKC, ELSPSTC and ELSTC.

What ceiling tiles does it fit?
Acoustic tile ceilings with tiles up to 24 in. wide.

Which back box is used with it?
For ET Series flush ceiling mounts, a standard 4 in. square by 2-1/8 in. deep box with a 1-1/2 in. extension ring. For all other Wheelock 4-inch flush ceiling speakers, a 4 in. square by 1-1/2 in. deep box with a 1-1/2 in. extension ring.

Is there a bridge for 8-inch speakers?
Yes. The SSB-8 is the 8-inch ceiling support bridge, and the CBB-8 is the 8-inch ceiling speaker back box.

Questions about this product

Is Eaton Wheelock SSB-4 Tile Bridge, 4" Speaker Support in stock?

Yes — 31 units are available and ready to ship from our US warehouse.

How fast will Eaton Wheelock SSB-4 Tile Bridge, 4" Speaker Support ship?

Orders placed before 3:00 PM ET ship the same business day. Delivery takes 3–5 business days inside the USA.

Where does Eaton Wheelock SSB-4 Tile Bridge, 4" Speaker Support ship from?

It ships from the United States. Standard delivery is 3–5 business days, and orders placed before 3:00 PM ET go out the same day.

Cart0
Your cart is empty

Have an account? Log in to check out faster.

Continue shopping