Skip to content

Free shipping on orders over $99.

8:30 to 5 ET(704) 555-0142
Not sure what you have? Send the part number(704) 555-0142
Potter Potter PS-10-EX Explosion Proof Pressure Type Waterflow Switch view 1

Potter PS-10-EX Explosion Proof Pressure Type Waterflow Switch

Potter
$100.10
In stock — 9 available
In stock · ready to ship
Ships today — order before 3:00 PM ET
Delivery in 3–5 business days
Ships from the USA — free shipping over $99
BrandPotter
SKUPS10-EX
TypeWaterflow Detectors
Variants1

Potter PS10-EX is an explosion proof pressure actuated switch that detects a waterflow condition in automatic fire sprinkler systems in hazardous locations. Typical applications are wet pipe systems with alarm check valves, and dry pipe, preaction or deluge valves. It can also provide a low pressure supervisory signal, adjustable between 4 and 20 psi.

The switch has a cast aluminum enclosure rated IP66/NEMA 4, 9, a brass 1/2 in. NPT pressure connection and two independently adjustable switches that need no tools. Both switches are factory set to operate on pressure increase at 6 psi and on decrease at 5 psi. The cover uses a tamper resistant fastener that needs a special key, and one key is supplied.

Specifications

Hazardous locations Class I Div 1 Groups B, C, D; Class II Div 1 Groups E, F, G; Class III Div 1; Ex db IIB T6 Gb
Contacts Two SPDT (Form C): 15.0 A at 125/250 VAC, 2.0 A at 30 VDC
Pressure range 4 to 20 psi (0.27 to 1.3 bar)
Factory setting 6 ±1 psi on increase, 5 ±1 psi on decrease
Maximum differential 1 psi
Maximum system pressure 300 psi
Pressure connection 1/2 in. NPT male brass
Conduit 1/2 in. NPT female
Enclosure Cast aluminum, IP66/NEMA 4, 9
Temperature -40°F to 140°F (-40°C to 60°C)
Dimensions 6 in. diameter x 7 in. high
Service use NFPA 13, 13D, 13R, 72

Installation notes

  • Use Teflon tape on the threaded male connection; do not use pipe dope
  • Mount the switch in the upright position
  • Use an Ex component conduit sealing device to keep type "d" protection
  • Adjust each switch independently by hand

Related models

  • PS10-2 and PS10-1: standard pressure type waterflow switches
  • PS10-2A-EX
  • PS40-2: supervisory pressure switch

Documents

FAQ

Which hazardous locations is the PS10-EX rated for?
Class I Div 1 Groups B, C and D; Class II Div 1 Groups E, F and G; Class III Div 1; and CENELEC Ex db IIB T6 Gb.

What is the factory setting?
Both switches operate on pressure increase at 6 ±1 psi and on decrease at 5 ±1 psi. The adjustable range is 4 to 20 psi.

What are the contact ratings?
Two SPDT (Form C) sets rated 15.0 A at 125/250 VAC and 2.0 A at 30 VDC.

How is the conduit sealed?
The conduit entrance is 1/2 in. NPT female; use an Ex component conduit sealing device to maintain type "d" protection.

Questions about this product

Is Potter PS-10-EX Explosion Proof Pressure Type Waterflow Switch in stock?

Yes — 9 units are available and ready to ship from our US warehouse.

How fast will Potter PS-10-EX Explosion Proof Pressure Type Waterflow Switch ship?

Orders placed before 3:00 PM ET ship the same business day. Delivery takes 3–5 business days inside the USA.

Where does Potter PS-10-EX Explosion Proof Pressure Type Waterflow Switch ship from?

It ships from the United States. Standard delivery is 3–5 business days, and orders placed before 3:00 PM ET go out the same day.

Cart0
Your cart is empty

Have an account? Log in to check out faster.

Continue shopping