Skip to content

Free shipping on orders over $99.

8:30 to 5 ET(704) 555-0142
Not sure what you have? Send the part number(704) 555-0142
Potter Potter SCA-5070INT 50W Integrated Amplifier view 1

Potter SCA-5070INT 50W Integrated Amplifier

Potter
$111.36
In stock — 7 available
In stock · ready to ship
Ships today — order before 3:00 PM ET
Delivery in 3–5 business days
Ships from the USA — free shipping over $99
BrandPotter
SKUSCA-5070INT
TypeAmplifiers
Variants1

The Potter SCA-5070INT is a small-form, single channel 50 W integrated amplifier that mounts inside the IPA-4000V, AFC-1000V, LOC-1000 and PSN-1000E on an exclusive stacker bracket. It provides four Class B or four Class A speaker circuits.

The amplifier communicates over the P-Link bus, a 4-wire power and RS-485 connection, and receives audio through the V-Link 1 audio riser. It runs on constant 24 VDC from the fire panel or a PSN-1000 NAC circuit configured with the Potter Programmer. Speaker circuit voltage, 25 V or 70 V, is set in the panel programming software.

Specifications

Output 50 W, single channel; 50 W maximum per circuit
Speaker circuits 4 Class B or 4 Class A
Speaker voltage 25 VRMS or 70 VRMS, selectable
Standby current 50 mA
Alarm current 138 mA
Operating temperature 32 to 120°F (0 to 49°C)
Humidity 10 to 93% non-condensing
Stock number 3520665

Installation notes

  • The IPA-4000V, AFC-1000V and LOC-1000 each house one SCA-5070INT; the PSN-1000E houses up to two
  • The IPA-4000V supports up to 31 amplifiers and the AFC-1000V up to 10
  • Place a 15K end-of-line resistor on the last device on the V-Link circuit
  • Power from a NAC configured for constant 24 VDC
  • All circuits are power limited and supervised

Related models

The SCA-5070 is Potter's single channel amplifier in the same P-Link device family.

Documents

FAQ

Where does the SCA-5070INT mount?
Inside the IPA-4000V, AFC-1000V or LOC-1000 (one amplifier each) or the PSN-1000E (up to two), on its stacker bracket.

How many amplifiers can a system use?
Up to 31 on an IPA-4000V and up to 10 on an AFC-1000V.

How is it powered?
By constant 24 VDC from the fire panel or a PSN-1000 NAC circuit configured with the Potter Programmer. It draws 50 mA in standby and 138 mA in alarm.

How is 25 V or 70 V selected?
In the panel programming software; no hardware change is needed.

Questions about this product

Is Potter SCA-5070INT 50W Integrated Amplifier in stock?

Yes — 7 units are available and ready to ship from our US warehouse.

How fast will Potter SCA-5070INT 50W Integrated Amplifier ship?

Orders placed before 3:00 PM ET ship the same business day. Delivery takes 3–5 business days inside the USA.

Where does Potter SCA-5070INT 50W Integrated Amplifier ship from?

It ships from the United States. Standard delivery is 3–5 business days, and orders placed before 3:00 PM ET go out the same day.

Cart0
Your cart is empty

Have an account? Log in to check out faster.

Continue shopping