Skip to content

Free shipping on orders over $99.

8:30 to 5 ET(704) 555-0142
Not sure what you have? Send the part number(704) 555-0142
Protectowire Protectowire PM-3C Mounting Strap view 1

Protectowire PM-3C Mounting Strap

Protectowire
$1.14
In stock — 22 available
In stock · ready to ship
Ships today — order before 3:00 PM ET
Delivery in 3–5 business days
Ships from the USA — free shipping over $99
BrandProtectowire
SKUPM-3C
TypeAccessories
Variants1

Protectowire PM-3C is a pipe mounting strap set for fastening Protectowire linear heat detector cable to pipes from 4 in. to 6 in. (101 to 152 mm). Each PM-3C includes two straps of black, weather-resistant, UV-stabilized nylon 6/6: a large strap that wraps the pipe and a small strap that forms a loop around the detector.

The serrated side of the large strap grips the pipe surface, and the small strap secures the detector without damaging its outer jacket. Straps are rated from -40°F to 185°F, with a maximum recommended spacing of 5 ft.

Specifications

Pipe size 4 in. (101 mm) to 6 in. (152 mm)
Material Nylon 6/6, UV stabilized, black
Temperature -40°F (-40°C) to 185°F (85°C)
Maximum recommended spacing 5 ft (1.5 m)
Large strap 28.3 in. L x 0.5 in. W x 0.085 in. thick
Small strap 4.8 in. L x 0.19 in. W x 0.052 in. thick
Pieces 2

Installation notes

  • Wrap the large strap around the pipe with the serrations against the pipe surface
  • Feed the pointed end through the inside slot of the holding block closest to the pipe and pull tight
  • Pass the small strap through the vacant slot and loop it around the detector, serrated side against the detector
  • Secure without damaging the detector's outer jacket, then trim excess strap ends

Related models

  • PM-3A: double loop strap for 0.75 in. to 2 in. pipes
  • PM-3B: double loop strap for 2.5 in. to 3.5 in. pipes

Documents

FAQ

What pipe sizes does the PM-3C fit?
Pipes from 4 in. (101 mm) to 6 in. (152 mm). The PM-3A and PM-3B cover smaller pipe sizes.

How far apart should straps be installed?
Protectowire gives a maximum recommended spacing of 5 ft (1.5 m).

Which detectors can it be used with?
It is compatible with all Protectowire linear heat detectors, including PHSC, PLR, CTI and fiber optic LHD.

What temperatures can it handle?
The UV-stabilized nylon 6/6 straps are rated from -40°F (-40°C) to 185°F (85°C).

Questions about this product

Is Protectowire PM-3C Mounting Strap in stock?

Yes — 22 units are available and ready to ship from our US warehouse.

How fast will Protectowire PM-3C Mounting Strap ship?

Orders placed before 3:00 PM ET ship the same business day. Delivery takes 3–5 business days inside the USA.

Where does Protectowire PM-3C Mounting Strap ship from?

It ships from the United States. Standard delivery is 3–5 business days, and orders placed before 3:00 PM ET go out the same day.

Cart0
Your cart is empty

Have an account? Log in to check out faster.

Continue shopping