









RD1500.1
Color
| Brand | Rockville |
|---|---|
| SKU | RD1500.1 |
| Type | Car Audio and Video~Car Amplifiers~Mono |
| Color | Black, Gold |
| Variants | 1 |
Give your car's subwoofer system dedicated power without giving up a large section of your trunk. The Rockville RD1500.1 mono Class-D car amplifier has a 1500W certified RMS rating and supports 1-, 2-, and 4-ohm loads, with a compact chassis measuring 14.35 x 4.92 x 1.81 inches.
Shape the bass to suit your speakers and enclosure with adjustable bass boost centered at 45Hz, a 45Hz–200Hz low-pass filter, and a 10Hz–50Hz subsonic filter. The included metal bass remote puts subwoofer level control within reach, and its clipping indicator helps you monitor when to reduce the level.
A high-speed MOSFET power supply and Class-D design support efficient operation. Tiffany-style RCA terminals, an RCA preamp line output, and adjustable input sensitivity from 0.2V to 6.0V provide connection and setup flexibility. Power, protect, and clip LEDs show amplifier status, while IC-controlled protection circuitry monitors operation.
Engineered in the USA, the amplifier uses 4-gauge power and ground terminals and 8-gauge speaker-wire terminals. Check available mounting clearance before installation. An external fuse holder with a 150A fuse is included.
Advanced Details
The 1500W certified RMS rating and the listed dyno measurements describe continuous output, not peak power. The certified dyno results are 1550W at 1 ohm, 1014W at 2 ohms, and 620W at 4 ohms, each at less than 1% THD+N. Listed efficiency at those loads is 71%, 82%, and 86%, respectively. Peak ratings are listed separately below and should not be used as continuous-power ratings.
Specifications
- Type: mono Class-D car amplifier
- Certified RMS rating: 1500W
- Dyno-certified continuous output at 1 ohm: 1550W x 1 channel, less than 1% THD+N; 71% efficiency
- Dyno-certified continuous output at 2 ohms: 1014W x 1 channel, less than 1% THD+N; 82% efficiency
- Dyno-certified continuous output at 4 ohms: 620W x 1 channel, less than 1% THD+N; 86% efficiency
- Peak output: 6000W x 1 at 1 ohm; 4000W x 1 at 2 ohms; 2400W x 1 at 4 ohms
- Bass boost: 0–12dB at 45Hz
- Low-pass filter: 45Hz–200Hz
- Subsonic high-pass filter: 10Hz–50Hz
- Frequency response: 10Hz–200Hz
- Power supply: high-speed MOSFET
- Preamp circuitry: 8V
- Adjustable input sensitivity: 0.2V–6.0V
- RCA preamp line output; Tiffany-style RCA terminals
- Specified minimum THD at rated power: less than 0.5%
- Signal-to-noise ratio: greater than 75dB, A-weighted at 1W/4 ohms
- Damping factor: greater than 150 at 100Hz
- IC-controlled protection circuitry
- Power, protect, and clip LED indicators
- Remote subwoofer control with clipping indicator
- External fuse rating: 150A
- Power and ground terminals: 4 gauge
- Speaker-wire terminals: 8 gauge
- Dimensions (L x W x H): 14.35 x 4.92 x 1.81 inches (364.5 x 125 x 46mm)
In the Box
- RD1500.1 amplifier
- Metal bass remote with clipping indicator
- External fuse holder with 150A fuse
- Mounting screws
- Owner's manual
- Warranty card
Questions about this product
Is RD1500.1 in stock?
Yes — 10 units are available and ready to ship from our US warehouse.
How fast will RD1500.1 ship?
Orders placed before 3:00 PM ET ship the same business day. Delivery takes 3–5 business days inside the USA.
What color options does RD1500.1 come in?
Available color: Black, Gold. 1 variants in total, each with its own SKU and price.
Where does RD1500.1 ship from?
It ships from the United States. Standard delivery is 3–5 business days, and orders placed before 3:00 PM ET go out the same day.