








RDT-3
| Brand | Rockville |
|---|---|
| SKU | RDT-3 |
| Type | Car Audio and Video~Car Amplifiers~2 Channel |
| Variants | 1 |
Rockville RDT-3 2-Channel Class D Car Amplifier
Add dedicated power to your car speakers without taking up unnecessary installation space. The Rockville RDT-3 delivers 330 watts RMS per channel at 2 ohms or 200 watts RMS per channel at 4 ohms. For a compatible subwoofer setup, bridge the amplifier for 660 watts RMS at 4 ohms.
Match the output to your system
Choose full-range, low-pass, or high-pass operation for your speakers or subwoofer. Both crossover filters adjust from 50 Hz to 250 Hz, while the bass boost provides 0–12 dB of adjustment at 53 Hz.
Power, status mode, and clip LEDs give you a visual check of operating conditions during setup and use.
Compact design and practical connections
The chassis measures 8.68" x 4.92" x 1.81", helping you plan an installation where space is limited. Check available clearance before selecting a mounting location.
Digital Class D operation, stated efficiency of 84% or better, and an aluminum heatsink support efficient power use and heat management. Tiffany-style RCA inputs connect your audio signal, with 4 AWG power and ground terminals and 10 AWG speaker outputs for wiring.
RMS power ratings
Ratings measured at 1 kHz, 1% THD+N, and 14.4 VDC:
- 2-ohm stereo: 330 watts RMS x 2.
- 4-ohm stereo: 200 watts RMS x 2.
- 4-ohm bridged: 660 watts RMS.
Peak power ratings
Peak figures are separate from continuous RMS output. Use the RMS ratings when matching speakers or a subwoofer.
- 2-ohm stereo: 1,320 watts peak x 2.
- 4-ohm stereo: 800 watts peak x 2.
- 4-ohm bridged: 2,600 watts peak.
Sound controls and connections
- Crossover modes: full range, low pass, or high pass.
- Adjustable low-pass crossover: 50–250 Hz.
- Adjustable high-pass crossover: 50–250 Hz.
- Bass boost: 0–12 dB at 53 Hz.
- Input sensitivity: 220 mVrms–6 Vrms.
- RCA inputs: Tiffany-style terminals.
- Power and ground terminals: 4 AWG.
- Speaker wire outputs: 10 AWG.
- LED indicators: power, status mode, and clip.
Technical specifications
- Amplifier topology: digital Class D.
- Power supply: high-speed MOSFET.
- Stated efficiency: 84% or better.
- Frequency response: 10 Hz–22 kHz, ±3 dB.
- Distortion: less than 0.03% THD+N at 1 watt RMS, 20 Hz–20 kHz.
- Signal-to-noise ratio: 71 dBA, referenced to 1 watt RMS.
- Stereo separation: −60 dB at 5 kHz.
- Operating voltage: 8.3–16.4 VDC.
- Internal fuses: four 15A fuses.
- Heatsink: aluminum.
- Dimensions: 8.68" x 4.92" x 1.81".
What’s included
- RDT-3 amplifier.
- Owner’s manual.
- Mounting screws.
- Training video card.
- Extra fuses.
Questions about this product
Is RDT-3 in stock?
Yes — 7 units are available and ready to ship from our US warehouse.
How fast will RDT-3 ship?
Orders placed before 3:00 PM ET ship the same business day. Delivery takes 3–5 business days inside the USA.
Where does RDT-3 ship from?
It ships from the United States. Standard delivery is 3–5 business days, and orders placed before 3:00 PM ET go out the same day.