Space Age SSU-7-CO Replacement Carbon Monoxide Sensor for SL-701
| Brand | Space Age |
|---|---|
| SKU | SSU-7-CO |
| Type | Sensors |
| Variants | 1 |
The Space Age SSU-7-CO is the snap-in replacement carbon monoxide sensor for the SL-701 duct carbon monoxide detector. The SL-701 uses an electrochemical sensor that detects four levels of carbon monoxide in air moving through an HVAC duct, and its sensor has a limited life, so it is designed to be replaced in the field when it reaches end of life.
The SL-701 is a CO system detector (UL 2075) for supply, return or combined HVAC ducts. It is not a duct smoke detector or a residential CO alarm, and it is intended to be connected to a fire alarm or combination control unit.
Specifications
| Sensor type | Electrochemical carbon monoxide sensor |
| Expected life | About 6 years at 59 to 86°F and 30 to 60% RH |
| Self-test | Hidden self test once a day |
| Warm-up | 2 to 3 minutes after power is applied |
| Used in | Space Age SL-701 duct CO detector |
| Detector air velocity | 100 to 4,000 ft/min |
| Detector ambient temperature | 32 to 140°F (0 to 60°C) |
Installation notes
- End of life is calculated from the measured temperature and humidity at the sensor
- At end of life the sensor status LED goes off and the yellow fault LED turns on
- The SL-701 trouble contact opens on sensor end of life or if the sensor is removed
- If the yellow fault LED is the only indicator on, the sensor is defective or at end of life and must be replaced
- High or low temperature and low humidity shorten sensor life
- Up to 30 SL-701 detectors can be connected for common HVAC shutdown
Related models
The SSU-SL-701-KIT is the complete duct carbon monoxide detector kit, with the SL-701, MSR-50/CO remote accessory, sampling tube kit and exhaust tube.
Documents
FAQ
What does the SSU-7-CO fit?
It is the replacement carbon monoxide sensor for the Space Age SL-701 duct carbon monoxide detector.
How do I know the sensor needs replacing?
At end of life the sensor's status LED goes off and its yellow fault LED stays on, and the SL-701 trouble contact opens. If the yellow fault LED is the only indicator lit, the sensor is defective or at end of life.
How long does the sensor last?
About six years under optimal conditions of 59 to 86°F and 30 to 60% RH. High or low temperature and low humidity reduce its life.
What happens after a new sensor is installed?
The sensor warms up for 2 to 3 minutes, with its LEDs alternating, and then the green status LED stays on. It runs a hidden self test once a day.
Questions about this product
Is Space Age SSU-7-CO Replacement Carbon Monoxide Sensor for SL-701 in stock?
Yes — 12 units are available and ready to ship from our US warehouse.
How fast will Space Age SSU-7-CO Replacement Carbon Monoxide Sensor for SL-701 ship?
Orders placed before 3:00 PM ET ship the same business day. Delivery takes 3–5 business days inside the USA.
Where does Space Age SSU-7-CO Replacement Carbon Monoxide Sensor for SL-701 ship from?
It ships from the United States. Standard delivery is 3–5 business days, and orders placed before 3:00 PM ET go out the same day.